Optimum moisture levels for biodegradation of mortality composting envelope materials

Moisture affects the physical and biological properties of compost and other solid-state fermentation matrices. Aerobic microbial systems experience different respiration rates (oxygen uptake and CO2 evolution) as a function of moisture content and material type. In this study the microbial respiration rates of 12 mortality composting envelope materials were measured by a pressure sensor method at six different moisture levels. A wide range of respiration (1.6-94.2mg O2/g VS-day) rates were observed for different materials, with alfalfa hay, silage, oat straw, and turkey litter having the highest values. These four envelope materials may be particularly suitable for improving internal temperature and pathogen destruction rates for disease-related mortality composting. Optimum moisture content was determined based on measurements across a range that spans the maximum respiration rate. The optimum moisture content of each material was observed near water holding capacity, which ranged from near 60% to over 80% on a wet basis for all materials except a highly stabilized soil compost blend (optimum around 25% w.b.). The implications of the results for moisture management and process control strategies during mortality composting are discussed.     

Implication of hydraulic properties of bioremediated diesel-contaminated soil

The hydraulic properties, such as hydraulic conductivity and water retention, of aged diesel-contaminated and bioremediated soils were examined and implications of the hydraulic properties for assessing bioremediation performance of soils were proposed. Bioremediation of diesel-contaminated soil was performed over 80 d using three treatments; (I) no nutrient added, column-packed soil, (II) nutrient added, column-packed soil, and (III) nutrient added, loosen soil. Diesel reduction in treatment I soil (control soil) was negligible while treatment III showed the greatest extent of diesel biodegradation. All treatments showed greatest rates of diesel biodegradation during the first 20 d, followed by a much retarded biodegradation rate in the remaining incubation period. Reduction of the degradation rate due to entrained diesel within inaccessible soil pores was hypothesized and tested by measuring the hydraulic properties of two column-packed soils (treatments I and II). The hydraulic conductivity of treatment II soil (nutrient added) was consistently above that of treatment I soil (no nutrient added) at pressure heads between 0 and 15 cm. In addition, the water retention of treatment II soil was greater at pressure heads <100 cm (equivalent to pore size of >30 microm), suggesting that biodegradative removal of hydrocarbons results in enhanced wettability of larger soil pores. However, water retention was not significantly different for control and biodegraded soils at pressure heads >100 cm, where smaller size soil pores were responsible for the water retention, indicating that diesel remained in smaller soil pores (e.g., <30 microm). Both incubation kinetics and hydraulic measurements suggest that hydrocarbons located in small pores with limited microbe accessibility may be recalcitrant to bioremediation.     

Application of QUAL2Kw for water quality modeling and dissolved oxygen control in the river Bagmati

A stream water quality model, QUAL2Kw, was calibrated and validated for the river Bagmati of Nepal. The model represented the field data quite well with some exceptions. The influences of various water quality management strategies have on DO concentrations were examined considering: (i) pollution loads modification; (ii) flow augmentation; (iii) local oxygenation. The study showed the local oxygenation is effective in raising DO levels. The combination of wastewater modification, flow augmentation and local oxygenation is necessary to ensure minimum DO concentrations. This reasonable modeling guarantees the use of QUAL2Kw for future river water quality policy options.     

Improving land use inference by factorizing mobile phone call activity matrix

Land use is shaped by human activities. Traditional methods of measuring land uses (e.g. surveys and remote sensing techniques) often have difficulties in capturing human activities. The near-ubiquitous coverage of mobile phones opens up a new way to investigate land use through human activities. We propose to analyze land use by characterizing human activity patterns based on the aggregated call volume, and apply non-negative matrix factorization to identify fundamental behavioral classes. Using tower-based call data from Dakar, Senegal, we discover two fundamental land use patterns: commercial/business/industrial (C/B/I) and residential. Then, the land use of the reception area of each cell tower can be inferred based on the weights obtained for each basis vector. To evaluate the proposed approach, the results are compared with two points-of-interest (POI) data sets obtained from OpenStreetMap and Facebook’s Graph API. We have found that a majority of POIs like embassies, offices, and hotels are located in the predicted C/B/I areas; specifically, there is a strong positive correlation between estimated land use weights and the number of related POIs. Furthermore, we have shown analyzing 24-h call pattern matrix can track daily land use changes.     

Blood levels of cadmium and lead in residents near abandoned metal mine areas in Korea

We analyzed national data on blood lead levels (BLL) and blood cadmium levels (BCL) in residents living near 38 abandoned metal mining areas (n?=?5,682, 18–96 years old) in Korea that were collected by the first Health Effect Surveillance for Residents in Abandoned Metal mines (HESRAM) from 2008 to 2011. The geometric mean BCL and BLL were 1.60 μg/L (95 % CI?=?1.57–1.62 μg/L) and 2.87 μg/dL (95 % CI?=?2.84–2.90 μg/dL), respectively, notably higher than levels in the general population in Korea and other countries. We found significantly higher BLL and BCL levels in people living within 2 km of an abandoned metal mine (n?=?3,165, BCL?=?1.87 μg/L, BLL?=?2.91 μg/dL) compared to people living more than 2 km away (n?=?2,517, BCL?=?1.31 μg/L, BLL?=?2.82 μg/dL; P?<?0.0001) and to the general population values reported in the literature.     

Performance of a full-scale biofilm system retrofitted with an upflow multilayer bioreactor as a preanoxic reactor for advanced wastewater treatment

To enhance nitrogen removal in an existing microbial contact oxidation (MCO) system with a treatment capacity of 900 m3/d, an upflow multilayer bioreactor (UMBR) was chosen as a preanoxic reactor for the removal of organic matter and nitrate. The removal performance of the retrofitted plant was evaluated during the startup phase at a low temperature in winter. The high removal (>80%) of organic matter and suspended solids in the UMBR provided stable nitrification conditions in the MCO system, as a result of the substantial reduction in organic matter and solids loaded onto the MCO system. This treatment system showed a stable nitrogen removal efficiency of 75.3%, even in the low temperature range 7 to 10 degrees C. Phosphorus was completely removed by chemical precipitation. Production rates of excess sludge, as a function of the loads of influent flowrate and biological oxygen demand (BOD), were 0.022 kg dry solid/m3 wastewater and 0.132 kg dry solid/kg BOD.     

Birnessite mediated debromination of decabromodiphenyl ether

Decabromodiphenyl ether (BDE-209) is a major component of a commercial flame retardant formulation; however, there is limited information on the fate of BDE-209 in the environment, including metal oxide mediated degradation. Laboratory experiments were conducted to investigate the birnessite (delta-MnO(2))-promoted debromination of BDE-209 in tetrahydrofuran (THF)-water systems as well as catechol solutions. Up to 100% (0.1044 micromol initial charge) of BDE-209 disappeared upon reaction with birnessite in THF/H(2)O (4:6-9:1). The formation of aqueous Br(-) from BDE-209 reduction was determined and up to 16 mole% of initial bromine was released over the course of the reaction indicating approximately 1.7 Br-C bonds were reduced per BDE-209 molecule. The distribution of debrominated congeners, however, indicated a much greater extent of debromination for some products than what was inferred from an average bromine mass balance. The produced congeners varied from tetra- to nona-bromodiphenyl ether, including BDE-47 and -99, during the 24 h reaction. Experiments with deuterated water indicated that water was not the major hydrogen donor in the reduction but rather THF provided the reducing power. This conclusion was supported by the presence of succinic acid, which was produced from oxidation of THF. The reactions with aqueous catechol, rather than THF-water mixtures, were performed to assess the possible role that compounds found in natural environments, such a tannin-like phenols, might have on the chemistry. These experiments indicated that birnessite mediated debromination of BDE-209 might occur in natural settings.     

Chemical analysis of soil and leachate from experimental wetland mesocosms lined with coal combustion products

Small-scale (1 m2) wetland mesocosm experiments were conducted over two consecutive growing seasons to investigate the effects on soil and leachate chemistry of using a recycled coal combustion product as a liner. The coal combustion product used as a liner consisted of flue gas desulfurization (FGD) by-products and fly ash. This paper provides the chemical characteristics of mesocosm soil and leachate after 2 yr of experimentation. Arsenic, Ca, and pH were higher in FGD-lined mesocosm surface soil relative to unlined mesocosms. Aluminum was higher in the soils of unlined mesocosms relative to FGD-lined mesocosms. No significant difference of potentially phytotoxic B was observed between lined and unlined mesocosms in the soil. Higher pH, conductivity, and concentrations of Al, B, Ca, K, and S (SO4-S) were observed in leachate from lined mesocosms compared with unlined controls while Fe, Mg, and Mn were higher in leachate from unlined mesocosms. Concentrations of most elements analyzed in the leachate were below national primary and secondary drinking water standards after 2 yr of experimentation. Initially high pH and soluble salt concentrations measured in the leachate from the lined mesocosms may indicate the reason for early effects noted on the development of wetland vegetation in the mesocosms.